[. . . ] PixMobile Adjustable Table AT2C-42JFS & AT2C-42JF Form E-433 Tools Required 5/32" and 1/8" Allen wrench and 3/8" and 7/16" wrench. [. . . ] The desired height may be obtained by raising the top table portion to the height preferred, then installing the four screws provided (one in each leg) in the holes that are aligned. Secure the screws and nuts with the allen wrench provided. 2. Figure 1 Figure 2 3. Assemble the flip-up shelves with two nylon washers, one hex nut, and one shoulder bolt to each table leg. One nylon washer must be placed between the shelf bracket and table leg. Engage the flip-up shelves in the horizontal position by hooking the small bent tab on the shelf brackets over the lip of the top shelf. Adjust the cabinet door by loosening the fasteners on the door and moving the door into position. [. . . ] 3100 North Detroit Street Post Office Box 137 Warsaw, IN 46581-0137 Phone: 574/267-8101 800-622-3737 http://www. da-lite. com [. . . ]